Skip to main content

Engine Overheating Reasons and Preventative Measures


The engine is the most important part of any vehicle so its protection from potential threats is essential. Generally, people bring their vehicles to a service station for overhauling, coolant filling or engine oil replacement. These are the essential requirements of any engine but you can have some additional measures that can improve the performance in a much better way. The exhaust wraps are one of those accessories that you need to ask for additionally while taking your car to the service station. These wraps prevent heat from outflowing so that it doesn’t affect other engine components. Some of the main consequences of engine overheating are given below. 



Reasons for Overheating

1)      Less air supply to the radiator
It is essential to keep your radiator’s temperature under control and it is generally done by radiator fan. If there is any malfunctioning in the fan, the hoses will overheat and stop working causing excessive heat. Using exhaust wraps, turbo blankets and heat shields reduce the temperature effect and keep the engine in working condition for longer.

2)      Coolant deficiency
Coolant is the basic requirement to keep the engine’s temperature at a controlled level. If there is any kind of leakage in the coolant tank, the engine will gradually heat up and result in breakdown after some time.

3)      Malfunctioning radiator
If your radiator is malfunctioning, it can be a major reason for engine overheating. The coolant fluids running inside radiator start leaking which increase the temperature.

4)    Low level of oil
The lubricant is an essential fluid for the fluent running of the engine. The engine faces lots of pressure during combustion which results in excess of heat and is controlled by proper lubrication. If the level of oil is low, the chances of engine breakdown increase. Along with proper lubrication, exhaust pipe wrap is also essential for the fluent running of the vehicle.

 Prevent your engine from the negative impacts of overheating with the help of insulating products manufactured by Kool Wrap.



Comments

Popular posts from this blog

Car Repair Tip - Protect Against Moisture in Your Exhaust System

A car is made with several components that must work properly to drive fluently on the road. Even a minor fault can turn into a severe problem and cost more than your budget. This only solution is regular service at a reliable service station where all internal and external parts are analysed thoroughly. The exhaust system is among the crucial elements of a vehicle that is meant of exhaling smoke out after the burning of fuel. Excellent condition of the exhaust system is essential for vehicle safety, environment care and better mileage. A malfunctioning exhaust exhales half burnt gases and one can hear the changed sound due to moisture and rust. Using exhaust heat wrap is the smartest solution to protect the whole system from decaying due to rust. It is a well-organised structure that has following parts:- Major Components of Exhaust System 1)    Manifold Manifold is the first attachment that you can see along with each cylinder of engine. Depending upon the engine size,